Ghost Immobiliser Fitter
Ghost immobilisers are among the most effective ways to safeguard your vehicle from thieves. They prevent vehicles from being started until the correct code is entered. They can also be used to track a car remotely. They are becoming increasingly popular and a lot of insurance companies offer discounts to drivers who have these systems.
It is tamper-proof
The Ghost Immobiliser, an advanced security device, blocks your car from beginning without a unique PIN or beacon. The system can be modified to suit your vehicle and is highly effective as an anti-theft solution. After installation, it's essential to test the system to make sure that it's functioning properly. By entering the PIN as you start the engine is a simple method to verify that the system has been installed correctly. Regular testing can identify any issues or problems with the system as early as is possible.
The system communicates with the ECU to stop your car from running unless the correct sequence is entered. You can do this using the electronic buttons located on your steering wheel or by using an app that you can download on your smartphone. Its low profile and tamperproof design make it difficult for thieves. It can also be used with beacons to determine the whereabouts of your vehicle. It is an excellent option to protect valuable vehicles that have been modified, or for those who wish to secure their expensive or valuable vehicles.
This tamper-proof device makes use of the buttons on your steering wheel to generate an exclusive sequence that only you know. It is mathematically impossible for thieves to guess and is easily changed by using a reset code. It can be used in most vehicles and is simple to install with the help of technicians.
After you have installed the device, you'll be required to connect it to a power source as well as a grounding point. To identify the wires required to connect the device, get the wiring diagram for your vehicle. To avoid short circuits and electrical damage, you should insulate the connections with heat-shrink tubing or insulation. Make sure you check the installation of the device and its connections to ensure there aren't any signs of interference.
Ghost 2 can be set up in Service/Valet Mode for older vehicles which require battery isolation during maintenance or servicing. This will disable the device with an individual pin code, stopping it from being re-activated by thieves.
It is wireless
In contrast to other anti-theft devices ghost immobilisers work silently and are not able to be identified by thieves. They can be fitted to a wide range of vehicles to safeguard them from hacking and key cloning attacks, as well as attacks using signal relays. They can also be used to track vehicles remotely. They can even notify owners instantly if their car is stolen. This is among the most effective ways to protect your car from theft and some insurance companies offer discounts to customers who have them installed.
The Ghost II immobiliser offers a easy and affordable method to protect your vehicle from theft. The device is wireless and is compatible with most automobiles. It is weatherproof and tamper proof which makes it a great choice for any vehicle. It also has a three-year warranty. The Ghost II is unlike other security devices because it does not require additional wiring or other components. The unique pin-code sequence safeguards against key cloning and theft by stopping your vehicle from starting until a specific sequence to disarm is entered. The sequence can vary between one and 20 buttons, which means thieves will have to spend longer trying to crack the code before they are able to escape.
The Ghost II can also block signals from a thief’s key fob. It will detect when the key fob has been stolen or hacked and disable the engine by triggering an alarm. It also stops the use of the signal relay device which is often employed by organized car-thief groups to gain access to vehicles.
It is crucial to test the Ghost Immobiliser system to ensure that it's functioning as intended. This will allow you to spot any issues early and fix them, before they become serious. As part of your routine vehicle check, it is a good idea for you to test the system. Enter the PIN code into the system and start the engine.
It is crucial that the immobiliser is mounted in a place that is difficult to access by thieves. If possible, hide the unit behind your dash using cable tie. Make sure all connections are properly insulated and can't be manipulated by thieves. Also, double-check the mounting location to ensure it is secure.
It is compatible with a variety of automobiles.
The ghost immobiliser is an extremely effective security device to stop car theft. It prevents your vehicle from starting until you input the correct pin code. This code can be generated by pressing a series of buttons that are already present on your steering wheel or door panel, or on your central console. The immobiliser is tamper proof and can be programmed by the owner at any time. It also shields against hacking, key-cloning and other malicious activities.
While some drivers might attempt to install the Ghost Immobiliser on their own, it is recommended that you use a professional. This is because the process of installation is complicated, and mistakes could render the device ineffective or even damage your vehicle. DIY installation can also void the warranties of the Ghost Immobiliser as well as your vehicle.
The best place to begin is by obtaining the wiring diagram for your vehicle model. This will provide you with an overview of the CAN H wires and CANL wires used for the immobiliser. Once you've identified these wires mark them to ensure that they're not accidentally disconnected during the installation process. Also, ensure that you select a secure and safe grounding point for the system.
Once the wires are connected, it's recommended to test the immobiliser to make sure everything is working correctly. Then, enter the PIN code to begin your engine and see if it runs correctly. It is a good idea to test the immobiliser regularly to ensure it is functioning as it was is intended.
The ghost immobiliser is unique in that it doesn't require LED indicators or keyfobs. It is able to be deactivated by a unique sequence that is displayed on your steering, door panel or the centre console. The immobiliser is also tamper-proof and leaves no evidence of its installation making it difficult for thieves to identify or disarm. Furthermore, it can be used to increase the security of your vehicle in the event of a break-in and is recommended by a variety of insurance companies.
Easy to install
The Ghost immobiliser, a highly sophisticated device, helps keep your vehicle secure even from the most skilled thieves. like this stops your vehicle from starting until a distinct PIN or sequence is entered with the key fob. This blocks hacking, cloning, and even key theft. Thieves aren't able to steal your car. It also employs a variety of other sensors to detect attempts to drive away and can notify the owner or the police in event of tampering.
Installing a ghost-immobiliser can be a challenge, especially for those who have no prior experience with alarms or other security systems. It is crucial to have the right equipment and materials for a successful installation. A multimeter is helpful for confirming electrical values. Insulation tape and cable ties are also useful for protecting connections. The Ghost immobiliser user manual offers specific instructions that are tailored to the specific model and wiring of your vehicle.
It is important to examine the wire locations for the CAN H and L before the installation to ensure accuracy. They are crucial for powering the immobiliser. Errors could lead to improper functionality or system failure. You should also label the wires with a piece of tape or labels to ensure you know where they are them. You should also identify the source of constant 12V and a grounding.
Once you have the correct location, you can start building the ghost immobiliser. First, you'll need to disconnect the battery to prevent short circuits and accidental airbag deployment. Then you can start connecting the wires. Follow the instructions in the manual to ensure that the installation is secure and secure.
After completing the wiring you can connect the Ghost immobiliser to the engine controller unit via CAN. It will be difficult for thieves to steal the device, as the device is directly connected to the engine control unit. They can't remove or disable it. It's also tamper-proof, and the only way to disable it is entering a personal pin number. The pin code is only accessible to the owner of the vehicle and the installer.
You can also use Ghost immobiliser to temporarily permit someone else to drive the car, such as when you're away on business or need service. This feature is known as the Service/Valet Mode, and it is activated using a key fob or mobile app.